STEP BY STEP GUIDE TO SETUP ACTIVE DIRECTORY ON WINDOWS SERVER 2008

This tutorial will explain how to install AD on server 2008. This will valid for windows 2008 R2 as well.

Requirement:

Minimum: Single processor with 1.4 GHz (x64 processor) or 1.3GHz (Dual Core)

Minimum: 512 MB RAM

Minimum: 32 GB or greater

The first step is to assign a ip to the server that you going to deploy the AD. Its nessary to install it as DNS server too. So its better to have fixed ip it doesn't mean you cannot install AD without fixed ip address but it will solve lot of issues if you used fixed ip.

In here the server ip is 10.0.0.14. Since we going to make it as DNS server too you should use the same ip as the preferred DNS server.

Next step is to install the Active directory roles. Unlikely the older version of windows servers Microsoft highly recommend to use server manager option to install roles before you run dcpromo.

Select the roles from the right hand panel and click on add roles option.

From the roles list select the "Active Directory Domain Services" role and Click "Next"

Review the confirmation and click on "Next"

Review the installation confirmation and click on "Next"

It will take few minutes to complete and when its done you will get this confirmation. And then click on "Close"

After that you will need to do a reboot.

After reboot please open up the "server Manager" again. And then click on "Roles" there you will see the "Active Directory Domain Services" is successfully installed in there. click on it then you will get a window like below.

In their please pay attention to the message

.

So please click on that link and it will start the DCPROMO wizard.

So next step to go through the DC promo wizard.

To start the installation click on "Next

Click on "Next"

Since we going to install New domain Controller in new forest please select the option "Create a new domain in new forest" option and click on "Next"

Now we have to provide the name for our domain controller. It must be FQDN. In our case I used rebeladmin.com as the domain. Please click "Next" after it.

In this window it will ask to select forest function level. If you going to add server 2003 domain controller to your forest later don't select the function level as server 2008. If you going to use full features of 2008 Ad you must select forest function level as server 2008. In my case I used server 2008. Click on "Next" after the select

In next window since it's the first DC we should make it as DNS server too. Leave the default selection and click on "Next"

If the wizard cannot create a delegation for the DNS server, it displays a message to indicate that you can create the delegation manually. To continue, click "Yes"

In next window it will show up the database location. It its going to be bigger AD its good if you can keep NTDS database in different partition. Click on "Next" after changes.

In next window its asking to define a restore mode password. Its more important if you had to do a restore from backup in a server crash. Click on "Next" after filling it.

Next window is giving you a brief of the installation. Click on "Next"

Then it will start the installation of the AD. It will take some time to complete. After complete of the installation perform a server reboot.

Then it will start the installation of the AD. It will take some time to complete. After complete of the installation perform a server reboot.

User name : your domain\administrator

Password : XXXXXXXX

Now its done and you can view the active directory options on administrative tools menu

Hope this tutorial is clear for you guys. If any question please ask me on rebeladm@live.com

contect -919628273549

Job Interview Questions on basic Computer Technology and Internet Part-2

Here I am going to share you about list of  basic Input Devices, Output devices and  Both input–output devices  related to computer

 Input Devices:

a)      Graphics Tablets
b)      Cameras
c)      Video Capture Hardware
d)     Trackballs
e)      Barcode reader
f)       Digital camera
g)      Gamepad
h)      Joystick
i)        Keyboard
j)        Microphone
k)      MIDI keyboard
l)        Mouse (pointing device)
m)    Scanner
n)      Webcam
o)      Touchpads
p)      Pen Input
q)      Microphone
r)       Electronic Whiteboard
s)     OMR
t)      OCR
u)     Punch card reader
v)    MICR (Magnetic Ink character reader)
w)     Magnetic Tape Drive

OUTPUT  DEVICES:

Monitor (LED, LCD, CRT etc)
Printers (all types)
Plotters
Projector
LCD Projection Panels
Computer Output Microfilm (COM)
Speaker(s)
Head Phone
Visual Display Unit
Film Recorder
Microfiche

Both Input–OutPut Devices:

1.Modems

2.Network cards

3.Touch Screen

4.Headsets (Headset consists of Speakers and Microphone. 

Speaker act Output Device and     Microphone act as Input 

            device)

5. Facsimile (FAX)  (It has scanner to scan the document and also 

           have printer to Print the  document)

6 .Audio Cards / Sound Card

All about basic

List of Input Devices, Output Devices and Both Input Output devices related to computer.

In my Last Post I have shared about the following Job Recruitment Questions on Basic Computer Technology and Internet…Job Recruitment Questions on Basic Computer Technology and Internet Part-1

Have you ever faced Bank Recruitment exam? Are you trying or preparing yourself for Government job?

If you are trying to build up your career then this section will be helpful for you.

In any type of Recruitment examination you will be asked to answer various types of questions. For example: General Knowledge, Basic English, Analytical, Computer and Technology, Basic Computer Knowledge, Basic Computer questions etc.

So, whatever the question you may face, but, questions regarding Basic Computer Knowledge and Technology  becomes  common in most of the recruitment examination.

In Bangladesh, India, Pakistan and Most of the countries of the world, either in Bank or in any type of  Government or Nongovernment (Private Sector) recruitment examination, question regarding Basic Computer and Technology is must.

Here, I have tried to share some basic interview questions regarding Basic Computer and Technology with solutions which will help you to prepare yourself in the recruitment exam and also will boost your preparation by providing basic computer knowledge.

Questions with Answer

Question: What is the elaboration of VOIP?

Answer:    Voice Over Internet Protocol.

Question: E-mail stands for?

Answer:   Electronic mail

Question:Write some common output devices of computer.

Answer:  Monitor, Printer and Speaker.

Question: Give some Example of programming language.

Answer:  BASIC, PaSCAL, C++, FORTRAN

Question: What is YouTube?

Answer: YouTube is a famous video sharing site.

Question:What is WiMax?

Answer :  WiMax is  Wireless Internet Technology.

Question: What is Cyber Super Weapon?

Answer: Cyber Super Weapon is a computer virus.

Question: What is  Palmtop?

Answer: Palmtop is a kind of small computer.

Question: What is XO?

Answer: Tablet Pc

Windows 7 Remote Desktop Connection Instructions

1. Click the “Windows” button

2. Click on “All Programs

3. Click on “Accessories”

4. Click on “Remote Desktop Connection”

5. Enter the IP address of the computer that you desire to connect to. Click here for instructions on how to find out the IP address

6. If this is a connection that you will be making often, continue to step 7, others can skip to step 12

7. Click on “Options”

8. Click “Save As”

9. On the left hand side of the pop-up window, select “Desktop”

10. Enter a “Filename” that will help you recognize what this connection is for(example: Work_PC)

11. Click “Save”

12. Click “Connect”

If you run into issues connecting to a machine, make sure that the computer is allowed remote desktop connections and that you are an allowed user.


Any problem   contect plz-+919628273549

     

How to use Vlookup in Excel

Basically, VLOOKUP lets you search for specific information in your spreadsheet. For example,if you have a list of employee details, you could search for the details of specific employee.

1.To use vlookup first of all we have to create table (as shown in figure.)

2. Select tables and give table names such as Hulk.(as shown in figure)

3.Now we will write his name TO SEE the vlookup such as we want to see mobile number of Ram. Then we will type Ram and use vlookup formula for Ram.

=VLOOKUP(H19,HULK,6,0)

EXPLANATION

H19= IF YOU WANT TO SEE VLOOKUP OF RAM THEN CLICK ON RAM, H19 WILL BE SELECTED AUTOMATICALLY.BY THIS YOU CAN SEE  ANYONE VLOOKUP.NOW HERE I AM USING RAM. (YOU CAN TYPE ANY ONE NAME INSTEAD OF Ram)

HULK= HULK IS TABLE NAME (TABLE ARRAY)

6= WRITE THAT COLUMN  NUMBER  WHICH COLUMN NUMBER YOU WANT TO SEE.(FOR EX. COL 6)

0= FALSE VALUE(IT SHOW EXACT VALUE)

4.And press enter.It show the mobile number of Ram.

Then it show the Mobile no. of Ram

Now you have learnt the use of vlookup .

Password Protect Any Folder Without Any Software

In my previous post i have teach you to hide files behind images. In this tutorial i will show you interesting and usefull trick to password protect folder without using any software using batch file programming. This trick will work on all windows platform (Win XP, Win 7). Follow below tutorial to learn this trick

How To Lock Folder ?

1. Open Notepad and Copy code given below into it. 

cls

@ECHO OFF

title perfectit4u.blogspot.com

if EXIST "Control Panel.{21EC2020-3AEA-1069-A2DD-08002B30309D}" goto UNLOCK

if NOT EXIST MyFolder goto MDMyFolder

:CONFIRM

echo Are you sure to lock this folder? (Y/N)

set/p "cho=>"

if %cho%==Y goto LOCK

if %cho%==y goto LOCK

if %cho%==n goto END

if %cho%==N goto END

echo Invalid choice.

goto CONFIRM

:LOCK

ren MyFolder "Control Panel.{21EC2020-3AEA-1069-A2DD-08002B30309D}"

attrib +h +s "Control Panel.{21EC2020-3AEA-1069-A2DD-08002B30309D}"

echo Folder locked

goto End

:UNLOCK

echo Enter password to Unlock Your Secure Folder

set/p "pass=>"

if NOT %pass%== SECURITY goto FAIL

attrib -h -s "Control Panel.{21EC2020-3AEA-1069-A2DD-08002B30309D}"

ren "Control Panel.{21EC2020-3AEA-1069-A2DD-08002B30309D}" MyFolder

echo Folder Unlocked successfully

goto End

:FAIL

echo Invalid password

goto end

:MDMyFolder

md MyFolder

echo MyFolder created successfully

goto End

:End

2. Save the notepad file as lock.bat (.bat is must) 

3. Now double click on lock.bat and a new folder will be created with name MyFolder

4. Copy all your data you want to protect in that New folder 

5. Now double click on lock.bat and when command promp appears Type Y and press enter. 

6. Now MyFolder will be hidden from you view, to access that folde double click on lock.bat 

7. It will ask for password enter your password and done. (Default password is security) 

·         To change the password replace Security with new password in the above code

How To Further Secure ?

You might be thinking that anyone can access the password by opening that lock.bat file in Notepad or any other text editor. To make it more secure hide lock.bat in some secure location after following the above tutorial To access the secured file double click on lock.bat. I would suggest copying lock.bat file into Pendrive and copying it into your computer whenever you required to access to your protected files. 

Set up a computer-to-computer (ad hoc) network

An ad hoc network is a temporary connection between computers and devices used for a specific purpose, such as sharing documents during a meeting or playing multiplayer computer games. You can also temporarily share an Internet connection with other people on your ad hoc network, so those people don’t have to set up their own Internet connections. Ad hoc networks can only be wireless, so you must have a wireless NETWORK ADAPTER installed in your computer to set up or join an ad hoc network.

click to open network and sharing center.
click to manage wireless network.

 click to add button.

click on create an ad hoc network

fill the required information,
   such as network name=adhoc ,security type=wpa2-professional
   security key=123@qwe, check save the network tab.

 process start to create ad hoc network.

then click close button.

            click on the network icon tab on the
            created ad hock network. as shown in the figure.

           

For more latest update to visit my website 

rajnishjaiswalj928.blogspot.in

Learn To Hide Files Behind The Images

There are some important  files or document you want to hide from others on your computer. To do that you might be creating folder inside folder to hide such files but in todays tutorial i will change this by teaching you a interesting trick to hide files behind images.To hide a file behind a image  means that if any one opens that image he will see the image, but to see the hidden file we need to open that image in a specific way. So lets get started.

How To Hide File Behind Image ?

In order to do this you should have basic understanding of command line, but if you don't know check out  tutorial given below.

1. Select an image to be used for hiding file behind the image.

2. Now select a file to hide behind the image and make it in .RAR format. With the help of the WinRAR.(Download winrar)

3. And most important is that paste both the files on desktop. You may do this anywhere instead of desktop if you have some basic understanding of command line.

4. Now open cmd by going to Start > Accessories > Command Prompt and type following commands in it.

cd desktop

5. CD stands for change directory by typing above command you change your directory to desktop. After that type command given below.

 Copy /b imagename.jpg + filename.rar finalimage.jpg

Replace imagename.jpg with the name of image you want your file to be hidden behind. Don't forget to add image format (Eg: .jpg,.png,.gif)

Replace filename with name of your file you want to hide. It must be in .rar format.

Finally Replace finalimage.jpg with whatever name you want your final image with hidden files should be. This is the image where your file will be hidden.

6. Now when you will try to open this newly created image it will open as normal image, but to open you hidden file you need follow steps given below.

How To Access Hidden File ?

To access your hidden file you need to open the newly created image in winrar. Just follow simple steps given below to do that.

HOW TO MAKE MULTIBOOTABLE WINDOWS USB FROM WinSetupFromUsb

In this guide, we will show you how to create multi-boot USB drive containing Windows 7 and Windows 8.1 installation files with the help of WinSetupFromUSB software.

ollow the given below instructions carefully to prepare your multi-boot USB drive containing Windows 7 and Windows 8.1 installation files,



Things you will need to prepare multiboot USB:
# Windows 7 ISO file
# Windows 8/8.1 ISO file
# 8 GB+ USB drive (we recommend 16 GB for 64-bit Windows)
# A computer running Windows 7, 8, or 8.1
NOTE: You must have Windows 7 and Windows 8/8.1 ISO files. If you have Windows 7 or Windows 8.8.1 DVDs, you need to prepare an ISO file image out of the DVD first. There are plenty of tools out there to help you crate bootable ISO image file from DVD. Almost all popular ISO image burning software, including popular ISO Workshop (free) allows you create ISO image from DVD.
Procedure:
Step 1: Visit this page and download the latest version of WinSetupFromUSB file. Extract the compressed zip file to get a folder named WinSetupFromUSB with separate executable for 32-bit and 64-bit Windows.
Step 2: Connect your USB drive to the PC and backup all data to a safe location, as the drive will be erased before making bootable.
Step 3: Run WinSetupFromUSB. Note that if you’re on x64 bit Windows, please run the executable named WinSetupFromUSB x64. Click Yes button when you see the UAC dialog.
Step 4: Under USB disk selection and format tools section, select your USB flash drive that you would like to make multi-boot.
Step 5: Turn the option titled Auto format it with FBinst on and then select NTFS as the file system. Note that if you’re preparing this multi-boot USB to install Windows 7/8.1 on a UEFI based PC, you need to selectFAT32 instead of NTFS.

Step 6: Under Add to USB disk section, check the box titled Windows Vista/7/8/Server 2008/2012 based ISO to see the browse button and then click the browse button to browse to your Windows 7 ISO image file. Select your Windows 7 ISO and then click Open button.

NOTE: If you have selected NTFS as the file system in Step 5, when you click the browse to select the ISO file, you will get a message saying that “If you need (U)EFI support for the 64-bit versions of Windows Vista SP1 or later, you must use FAT32 partition.”

Step 7: Finally, click Go button to begin transferring Windows 7 setup files to your USB. Click Yes button when you see the warning dialogs to continue. The process might take 15-30 

minutes depending on the version of Windows you’ve selected and your PC’s hardware.

Once done, you’ll see Job done message.

Now that we have added Windows 7 installation files to the USB, it’s time to transfer Windows 8/8.1 files to the USB. Don’t disconnect the USB from the PC and also don’t quit WinSetupFromUSB.

Step 8: In this step, we’re going to add Windows 8/8.1 installation files to the USB. Select your USB drive andbe sure to keep the option Auto format with FBinst turned off (selecting it will format the USB drive again, so be sure not to select it).

Step 9: Check Windows Vista/7/8/Server 2008/2012 based ISO file and this time, browse to your Windows 8.1 ISO file and click Open button to select it.

Step 10: Finally, click GO button, click Yes when you see two warning messages to begin transferring Windows 8/8.1 installation files to the selected USB. Once WinSetupFromUSB completes its business, you’ll see Job done message. You can safely remove the USB and then use it as multi-boot USB to install Windows 7 or Windows 8/8.1. That’s it! Good luck |